LOLER 1998 · Essex

LOLER inspection, testing and certification in Stanford-le-Hope

Thorough examination, testing and certification of lifting equipment by an independent competent person

Stanford-le-Hope sits beside one of the largest logistics parks in the country, the sheds serving the deep-sea terminal at London Gateway, where very-narrow-aisle and high-reach fleets work heights most warehouses never see. Lifting at that height is where LOLER 1998 earns its keep.

0330 043 8191 Request a quote
  • Independent & impartial
  • Competent engineer surveyors
  • Reports issued promptly

Lifting equipment we examine

Stanford-le-Hope, Essex

  • Overhead & gantry cranes
  • Hoists & lift trucks
  • Slings, chains & accessories
  • MEWPs & access platforms
  • Passenger & goods lifts
  • Vehicle & tail lifts
Lifting equipment we examine

LOLER testing and certification for Stanford-le-Hope businesses

Extreme-height work concentrates examination where the consequences live: masts proven through full extension, chains measured for the stretch that constant top-beam cycles produce, and man-up trucks whose platforms carry people as well as pallets, bringing the six-month cycle with them. Equipment that lifts people is examined twice as often for a reason.

The park's scale also means fleets, and fleets mean scheduling: dozens of trucks per shed, none of which the operation wants idle. We examine in waves around shift patterns, batteries and despatch peaks, so the statutory cycle costs hours, not throughput.

Masts proven at full height
Man-up trucks on 6 months
Chain stretch measured
Fleets examined in waves
How it works

Booking your LOLER inspection in Stanford-le-Hope

Tell us the fleets and the heights. We examine through full extension, in waves around your shifts, and report promptly.

  • 1

    Get in touch

    Tell us what lifting equipment you have in Stanford-le-Hope.

  • 2

    On-site examination

    A competent engineer surveyor thoroughly examines each item.

  • 3

    Your report

    You receive a Report of Thorough Examination, your legal record.

Why businesses choose SEIS

  • Independent and impartial: we examine, we do not sell the equipment
  • Competent engineer surveyors
  • Clear reports issued without delay
  • Single items or whole sites
Areas we cover

LOLER inspection, testing and certification across Stanford-le-Hope and nearby

Our engineer surveyors cover Stanford-le-Hope and the towns around it across Essex. If your site is nearby, we can almost certainly reach you, so just ask.

Stanford-le-HopeCorringhamHorndon-on-the-HillFobbingBasildonGraysTilburyCanvey Island
Other inspections in Stanford-le-Hope

Related compliance for Stanford-le-Hope businesses

Many sites need more than one statutory regime. If you use lifting gear, pressure systems, work equipment or extraction in Stanford-le-Hope, we can examine all of it.

PUWER work equipment in Stanford-le-HopeView this service PSSR pressure systems in Stanford-le-HopeView this service COSHH LEV testing in Stanford-le-HopeView this service
LOLER FAQs

LOLER inspection, testing and certification: common questions

Do you carry out LOLER examinations in Stanford-le-Hope?
Yes. Our engineer surveyors cover Stanford-le-Hope, Corringham and the logistics park, examining high-bay fleets around shift patterns. Call us to arrange a visit.
How quickly can you get to Stanford-le-Hope?
We keep availability across Essex, so a Stanford-le-Hope visit is usually within a couple of working days, sooner when equipment is needed back in service. Call 0330 043 8191 to book around your operations.
How often must lifting equipment be thoroughly examined?
At least every 6 months for equipment that lifts people and for all lifting accessories, and at least every 12 months for other lifting equipment, or to an examination scheme set by a competent person. Those intervals are legal maximums, and an examination is also due after any exceptional event such as an overload or major repair; the HSE sets this out in its LOLER guidance.
Is LOLER a legal requirement?
Yes. Under LOLER 1998 the duty holder must ensure lifting equipment is thoroughly examined by a competent person and is not used once its examination has lapsed, and that responsibility stays with you even when the work is outsourced.
Do you load-test our lifting equipment every time?
No. LOLER calls for thorough examination, with testing only where it is necessary, and the HSE advises against routine overload testing because it can damage sound equipment. We test only where the examination genuinely requires it.
Who counts as a competent person for LOLER?
Someone with the practical and theoretical knowledge and experience to find defects and judge their significance, and who is sufficiently independent and impartial to report without pressure. The HSE is clear this should not be the person who maintains the same equipment.
What is a LOLER certificate, and how long do I keep it?
It is the Report of Thorough Examination required by Regulation 10, recording each item's condition, any defect found and its category, and the date the next examination is due. Keep it at least until the next examination, and it is this report an inspector or insurer asks to see.
Does lifting equipment also fall under PUWER?
Yes. LOLER covers the lifting duties while PUWER covers the same item as work equipment more generally, so the two overlap. We sort each item to the right regime so nothing is missed or examined twice over.

Due a LOLER inspection or certificate in Stanford-le-Hope?

Talk to an engineer surveyor, get a quote and book your inspection in Stanford-le-Hope.

0330 043 8191 Request a quote