LOLER 1998 · Essex

LOLER inspection, testing and certification in Chelmsford

Thorough examination, testing and certification of lifting equipment by an independent competent person

Chelmsford's industry is precise: imaging sensors and vacuum electronics built in controlled environments, research campuses moving delicate rigs, and a drinks plant palletising at pace on the city's edge. Lifting here ranges from cleanroom hoists to high-care forklifts, all under LOLER 1998.

0330 043 8191 Request a quote
  • Independent & impartial
  • Competent engineer surveyors
  • Reports issued promptly

Lifting equipment we examine

Chelmsford, Essex

  • Overhead & gantry cranes
  • Hoists & lift trucks
  • Slings, chains & accessories
  • MEWPs & access platforms
  • Passenger & goods lifts
  • Vehicle & tail lifts
Lifting equipment we examine

LOLER testing and certification for Chelmsford businesses

Precision-environment lifting is examined for what it must not do: contaminate, shock-load or drift. Cleanroom and lab hoists, gantries over test equipment and the tackle that moves seven-figure rigs are proven gently but completely, with documentation matched to environments where every entry is logged.

The production end of the city runs the opposite register: palletisers, high-level order pickers and the fleets feeding fast lines, where wear accumulates by shift rather than by year. Both registers share one legal cycle and, with us, one planned programme and one point of contact.

Cleanroom hoists proven
Delicate rigs moved safely
High-care fleets examined
Palletiser lifting judged
How it works

Booking your LOLER inspection in Chelmsford

Tell us the environments and the equipment. We examine to the standards each demands and issue every report promptly.

  • 1

    Get in touch

    Tell us what lifting equipment you have in Chelmsford.

  • 2

    On-site examination

    A competent engineer surveyor thoroughly examines each item.

  • 3

    Your report

    You receive a Report of Thorough Examination, your legal record.

Why businesses choose SEIS

  • Independent and impartial: we examine, we do not sell the equipment
  • Competent engineer surveyors
  • Clear reports issued without delay
  • Single items or whole sites
Areas we cover

LOLER inspection, testing and certification across Chelmsford and nearby

Our engineer surveyors cover Chelmsford and the towns around it across Essex. If your site is nearby, we can almost certainly reach you, so just ask.

ChelmsfordGreat BaddowSpringfieldBorehamWithamDanburyMaldonBraintree
Other inspections in Chelmsford

Related compliance for Chelmsford businesses

Many sites need more than one statutory regime. If you use lifting gear, pressure systems, work equipment or extraction in Chelmsford, we can examine all of it.

PUWER work equipment in ChelmsfordView this service PSSR pressure systems in ChelmsfordView this service COSHH LEV testing in ChelmsfordView this service
LOLER FAQs

LOLER inspection, testing and certification: common questions

Do you carry out LOLER examinations in Chelmsford?
Yes. Our engineer surveyors cover Chelmsford and its campuses and plants, examining precision and production lifting alike. Call us to arrange a visit.
How quickly can you get to Chelmsford?
We keep availability across Essex, so a Chelmsford visit is usually within a couple of working days, sooner when equipment is needed back in service. Call 0330 043 8191 to book around your operations.
How often must lifting equipment be thoroughly examined?
At least every 6 months for equipment that lifts people and for all lifting accessories, and at least every 12 months for other lifting equipment, or to an examination scheme set by a competent person. Those intervals are legal maximums, and an examination is also due after any exceptional event such as an overload or major repair; the HSE sets this out in its LOLER guidance.
Is LOLER a legal requirement?
Yes. Under LOLER 1998 the duty holder must ensure lifting equipment is thoroughly examined by a competent person and is not used once its examination has lapsed, and that responsibility stays with you even when the work is outsourced.
Do you load-test our lifting equipment every time?
No. LOLER calls for thorough examination, with testing only where it is necessary, and the HSE advises against routine overload testing because it can damage sound equipment. We test only where the examination genuinely requires it.
Who counts as a competent person for LOLER?
Someone with the practical and theoretical knowledge and experience to find defects and judge their significance, and who is sufficiently independent and impartial to report without pressure. The HSE is clear this should not be the person who maintains the same equipment.
What is a LOLER certificate, and how long do I keep it?
It is the Report of Thorough Examination required by Regulation 10, recording each item's condition, any defect found and its category, and the date the next examination is due. Keep it at least until the next examination, and it is this report an inspector or insurer asks to see.
Does lifting equipment also fall under PUWER?
Yes. LOLER covers the lifting duties while PUWER covers the same item as work equipment more generally, so the two overlap. We sort each item to the right regime so nothing is missed or examined twice over.

Due a LOLER inspection or certificate in Chelmsford?

Talk to an engineer surveyor, get a quote and book your inspection in Chelmsford.

0330 043 8191 Request a quote