PUWER 1998 · Lancashire

PUWER inspection and assessment in Blackpool

Inspection and testing of work equipment against the five PUWER duties by an independent competent person

Behind Blackpool's front-of-house glamour runs back-of-house machinery: flatwork ironers pressing sheets by the thousand, washers and dryers at industrial pace, all with the in-running nips laundry machinery has always had. PUWER 1998 works the back corridor too.

0330 043 8191 Request a quote
  • Independent & impartial
  • Competent engineer surveyors
  • Reports issued promptly

Work equipment we inspect

Blackpool, Lancashire

  • Machines & production lines
  • Conveyors & material handling
  • Fork trucks & lift fleets
  • Presses, guarding & interlocks
  • Test rigs & one-off equipment
  • Mixers, pumps & process plant
Work equipment we inspect

PUWER inspection and testing for Blackpool businesses

Work equipment across the town runs from hotel and commercial laundry machinery, ironers, calenders, washers and dryers, through kitchen and venue equipment to the workshop plant of the trades.

Laundry machinery is judged at the feed: flatwork ironer intakes guarded and trip-protected where hands follow linen toward heat and rollers, finger bars and stop systems proven at the speed real throughput runs, interlocks on washers and dryers tested because seasonal pressure tempts every shortcut, and training reviewed against a workforce that changes with the season. Our inspections test each machine at working pace, protection proven where hands genuinely go, and findings recorded per machine in the written record of inspection.

Ironer intakes proven
Finger bars and trips tested
Washer interlocks judged
Kitchen machinery alongside
How it works

Booking your PUWER inspection in Blackpool

Walk us down the laundry corridor mid-shift. We prove the intake protection at real pace and issue written inspection records with actions.

  • 1

    Get in touch

    Tell us about the work equipment on your Blackpool site.

  • 2

    Risk based inspection

    We assess each machine against the five duties and its risk.

  • 3

    Your report

    You receive a written inspection record with any actions.

Why businesses choose SEIS

  • Independent and impartial: we examine, we do not sell the equipment
  • Competent engineer surveyors
  • Clear reports issued without delay
  • Single items or whole sites
Areas we cover

PUWER inspection and assessment across Blackpool and nearby

Our engineer surveyors cover Blackpool and the towns around it across Lancashire. If your site is nearby, we can almost certainly reach you, so just ask.

BlackpoolBisphamMartonLaytonSquires GatePoulton-le-Fylde
Other inspections in Blackpool

Related compliance for Blackpool businesses

Many sites need more than one statutory regime. If you use lifting gear, pressure systems, work equipment or extraction in Blackpool, we can examine all of it.

LOLER lifting equipment in BlackpoolView this service PSSR pressure systems in BlackpoolView this service COSHH LEV testing in BlackpoolView this service
PUWER FAQs

PUWER inspection and testing: common questions

Do you carry out PUWER inspections in Blackpool?
Yes. Our engineer surveyors cover Blackpool and the surrounding sites, and inspect every kind of work equipment, proven at the feed. Call us to arrange a visit.
How quickly can you get to Blackpool?
We keep availability across Lancashire, so a Blackpool visit is usually within a couple of working days, sooner after a repair or modification. Call 0330 043 8191 to book around your production.
How often must work equipment be inspected under PUWER?
There is no single fixed interval. PUWER sets the frequency by the equipment, its risks and where it works, so hard-used or outdoor machinery is inspected more often, guided by the maker's advice and your risk assessment. The HSE explains this risk-based approach in its PUWER guidance.
Is PUWER a legal requirement?
Yes. Under PUWER 1998 whoever provides or controls work equipment must keep it suitable, maintained and inspected by a competent person, and that duty stays with the end user, including equipment that is hired in.
Does a PUWER inspection produce a certificate?
No. PUWER calls for a written record of inspection, not a certificate, naming each item, its condition, any defect and the date the next inspection is due. We keep that record clear and defensible, and it is what an HSE inspector asks to see.
Who can carry out a PUWER inspection?
A competent person with the knowledge and experience to know what to look at, what to look for and what to do about any defect. Simple low-risk items can be checked in-house by trained staff, while higher-risk machinery is better inspected by an independent competent person.
What does a PUWER inspection cover?
Whether the equipment is suitable and correctly installed, the condition of guards, interlocks, controls and stop devices, and any deterioration that has set in. Defects and the action needed are written down so nothing is lost between inspections.
How is PUWER different from LOLER?
LOLER covers lifting equipment and ends in a Report of Thorough Examination, while PUWER covers all work equipment and ends in an inspection record. They overlap on lifting machinery, so we sort each item to the right regime and inspect it once, correctly.

Need a PUWER inspection in Blackpool?

Talk to an engineer surveyor, get a quote and book your inspection in Blackpool.

0330 043 8191 Request a quote