PSSR 2000 · Buckinghamshire

PSSR inspection, examination and certification in High Wycombe

Written Schemes of Examination and certified pressure system examinations by an independent competent person

Behind every CNC router and finishing line in High Wycombe's furniture and fabrication units sits compressed air doing the quiet work: clamping, spraying, blowing down and feeding tools from receivers that put the workshop squarely inside PSSR 2000.

  • Independent & impartial
  • Competent engineer surveyors
  • Reports issued promptly

Pressure equipment we examine

High Wycombe, Buckinghamshire

  • Steam boilers & calorifiers
  • Air receivers & compressors
  • Pressure & process vessels
  • Autoclaves & sterilisers
  • Safety valves & protective devices
  • Pipework & heat exchangers
Pressure equipment we examine

PSSR examination and certification for High Wycombe businesses

Machine-shop air has a habit of growing: a receiver added for the router, another buffering the finishing line, small vessels scattered where pressure needed steadying. Each addition changes the installed system, and the Written Scheme of Examination has to keep describing what actually exists, small vessels included, or it certifies a fiction.

Wood-rich environments add their own examination angle: fine dust finds compressor intakes, moisture and oil carryover find low points, and receivers in dusty corners corrode from the outside as well as in. Caught on cycle these are maintenance notes; missed, they are the failures the regulation exists to prevent.

Grown systems mapped fully
Small vessels captured
Dusty-corner corrosion found
Schemes kept honest
How it works

Booking your PSSR examination in High Wycombe

Tell us the compressors and every vessel they feed. We keep the scheme honest, examine to it, and report clearly.

  • 1

    Written Scheme

    We prepare and certify your Written Scheme of Examination.

  • 2

    Examination

    We examine each part of the system to the scheme intervals.

  • 3

    Your report

    You receive a report on the condition of the system.

Wondering what it costs? See what drives a PSSR examination quote.

Why businesses choose SEIS

  • Independent and impartial: we examine, we do not sell the equipment
  • Competent engineer surveyors
  • Clear reports issued without delay
  • Single items or whole sites
Areas we cover

PSSR inspection, examination and certification across High Wycombe and nearby

Our engineer surveyors cover High Wycombe and the towns around it across Buckinghamshire. If your site is nearby, we can almost certainly reach you, so just ask.

High WycombeCressexLoudwaterWooburn GreenMarlowBeaconsfieldPrinces RisboroughBourne End
Other inspections in High Wycombe

Related compliance for High Wycombe businesses

Many sites need more than one statutory regime. If you use lifting gear, pressure systems, work equipment or extraction in High Wycombe, we can examine all of it.

PSSR FAQs

PSSR examination, written schemes and certification: common questions

Do you carry out PSSR examinations in High Wycombe?
Yes. Our engineer surveyors cover High Wycombe and its workshop units, examining machine-shop air systems to schemes that match reality. Call us to arrange a visit.
How quickly can you get to High Wycombe?
We keep availability across Buckinghamshire, so a High Wycombe visit is usually within a couple of working days, sooner when a system is waiting on its examination before use. Call 0330 043 8191 to book.
What is a Written Scheme of Examination, and do I need one?
It is the legal document at the heart of PSSR: a scheme drawn up and certified by a competent person that sets out which parts of a pressure system are examined, how, and how often. A system within scope must not be operated without one, and the HSE sets the minimum content in its pressure systems guidance.
Is PSSR a legal requirement, and what does it cover?
Yes. PSSR 2000 applies to systems holding steam at any pressure, or other fluids above roughly 250 bar litres, so steam boilers, air receivers, compressors, autoclaves and many process vessels are caught. The duty sits with the user of an installed system or the owner of a mobile one.
How often must a pressure system be examined?
There is no single interval fixed in law. The competent person sets the frequency for each item in the Written Scheme of Examination, judged on the system, its contents and its duty, with many items examined around every 12 months. The examination report is issued within 28 days and carries the next due date.
Who can be the competent person for PSSR?
Someone with the right combination of training, skill, experience and knowledge for the system in question, and independent enough to judge it fairly. The competent person both draws up or certifies the scheme and carries out the examinations it sets.
Does servicing the equipment count as a PSSR examination?
No. A PSSR examination is a formal statutory examination of the system's integrity against its written scheme, and it is separate from routine maintenance. Maintenance keeps a system running; it does not satisfy the legal duty to examine it.
What happens if the examination finds a defect?
The report records the defect, any limit on continued use and the date the next examination is due. Where the competent person finds a risk of imminent danger, the system must be taken out of use at once and the enforcing authority notified, so a problem is acted on rather than filed.

Need a PSSR examination or written scheme in High Wycombe?

Talk to an engineer surveyor, get a quote and book your inspection in High Wycombe.