COSHH 2002 · Lancashire

LEV testing and certification in Blackburn

Thorough examination, testing and certification of local exhaust ventilation by a P601 qualified engineer

Diesel exhaust is a recognised carcinogen, and depots make it indoors: buses, trucks and plant running up inside sheds every working morning. Around Blackburn's transport trades, depot extraction for diesel engine exhaust emissions is COSHH LEV with a serious verdict to earn, every 14 months.

0330 043 8191 Request a quote
  • Independent & impartial
  • Competent engineer surveyors
  • Reports issued promptly

Extraction we test

Blackburn, Lancashire

  • Welding & soldering fume
  • Wood, MDF & fine dust
  • Fume cupboards & cabinets
  • On-tool & capture hoods
  • Spray booths & paint lines
  • Grinding, polishing & mist
Extraction we test

LEV testing and certification for Blackburn businesses

Extraction across the town runs from depot and workshop exhaust extraction, tailpipe capture and high-level systems, through weld fume to the dust and workshop LEV of the estates.

DEEE control is judged where engines actually run: tailpipe capture proven across the vehicle mix a depot genuinely holds, connection practice observed because an extraction hose hanging beside an exhaust protects nobody, running-up and test procedures examined for the emissions they concentrate, and general depot air treated honestly where fixed capture cannot reach every movement. Our thorough examination tests each system against its design at working tempo, and reports a pass or fail per hood with readings attached.

Tailpipe capture proven
Connection practice observed
Running-up procedures judged
Weld and workshop LEV alongside
How it works

Booking your LEV test in Blackburn

Tell us the fleet and the morning routine. We prove the capture across the real vehicle mix and report per system with the next date set.

  • 1

    Get in touch

    Tell us about the extraction on your Blackburn site.

  • 2

    Examination and test

    We measure airflow and capture performance at each hood.

  • 3

    Your report

    You receive a report with measured data and remedial actions.

Why businesses choose SEIS

  • Independent and impartial: we examine, we do not sell the equipment
  • Competent engineer surveyors
  • Clear reports issued without delay
  • Single items or whole sites
Areas we cover

LEV testing and certification across Blackburn and nearby

Our engineer surveyors cover Blackburn and the towns around it across Lancashire. If your site is nearby, we can almost certainly reach you, so just ask.

BlackburnDarwenRishtonGreat HarwoodWilpshireMellor
Other inspections in Blackburn

Related compliance for Blackburn businesses

Many sites need more than one statutory regime. If you use lifting gear, pressure systems, work equipment or extraction in Blackburn, we can examine all of it.

LOLER lifting equipment in BlackburnView this service PUWER work equipment in BlackburnView this service PSSR pressure systems in BlackburnView this service
COSHH FAQs

LEV testing and certification: common questions

Do you carry out LEV testing in Blackburn?
Yes. We test LEV across Blackburn and the wider Lancashire area, covering exhaust captured where engines run. Call us to arrange a visit.
How quickly can you visit Blackburn?
A Blackburn visit is usually within a couple of working days, and we time testing around production so lines keep running. Call 0330 043 8191 to book your LEV test.
How often does LEV need to be tested?
Under COSHH Regulation 9 every local exhaust ventilation system must have a thorough examination and test at least every 14 months, and that interval is a legal maximum rather than a target. Higher-risk processes in COSHH Schedule 4 are tested far more often, in some cases monthly or six-monthly; the HSE sets this out in its guidance on LEV examination.
Is LEV testing a legal requirement?
Yes. The duty sits with the employer under COSHH Regulation 9, which requires extraction that controls a hazardous substance to be examined and tested by a competent person, and that responsibility stays with you even when the work is outsourced. You can read the duty in plain terms in our COSHH regulations guide.
What does an LEV thorough examination and test involve?
It is a structured check that the system still controls the contaminant the way it was designed to, not a service or a filter swap. We measure airflow and capture velocity at each hood, check duct velocities, filters and fan condition, and compare every reading against the design data and the HSG258 benchmarks.
Who is qualified to carry out LEV testing?
The HSE expects a competent person, which it links to BOHS-recognised training such as the P601 qualification. Our engineer surveyors hold P601 and report to the HSG258 standard, so the examination stands up to scrutiny.
What is in the LEV report, and how long must I keep it?
You receive the measured airflow and capture data, a pass or fail verdict at each test point, photographs, any remedial actions and the next due date, and it is this report an inspector asks to see rather than a service record. COSHH requires the records to be kept for at least five years, so we log every result against your system.
What happens if my LEV system fails the test?
The report sets out exactly why, for example low airflow, a worn fan or a badly positioned hood, and the remedial work needed to bring it back into adequate control. Once the work is done we can return to re-test and confirm the system is protecting people again.

Due an LEV test or certificate in Blackburn?

Talk to an engineer surveyor, get a quote and book your inspection in Blackburn.

0330 043 8191 Request a quote