LOLER 1998 · Cheshire

LOLER inspection, testing and certification in Ellesmere Port

Thorough examination, testing and certification of lifting equipment by an independent competent person

The newest heavy load in Ellesmere Port is the battery: packs and modules that are dense, expensive and hazardous in ways engine blocks never were. Where electric vehicles are built and serviced, battery handling equipment is LOLER 1998 kit with modern stakes.

0330 043 8191 Request a quote
  • Independent & impartial
  • Competent engineer surveyors
  • Reports issued promptly

Lifting equipment we examine

Ellesmere Port, Cheshire

  • Overhead & gantry cranes
  • Hoists & lift trucks
  • Slings, chains & accessories
  • MEWPs & access platforms
  • Passenger & goods lifts
  • Vehicle & tail lifts
Lifting equipment we examine

LOLER testing and certification for Ellesmere Port businesses

Lifting equipment across the town runs from battery and pack handling equipment, lifters, tables and manipulators, through production and line-side lifting to the fork trucks, hoists and accessories of the estates.

Battery lifting concentrates new-era risk: packs whose mass and value forbid improvisation, lifting interfaces engineered to specific modules and worth verifying against them, handling around stored electrical energy where a dropped pack is more than a dent, and workshop-scale kit reaching the trade as EVs reach every fleet. Our thorough examinations treat battery gear as the safety-critical class it is, interfaces and condition proven, capacities honest, and every Report of Thorough Examination issued so the newest loads travel on proven equipment.

Pack lifters and tables proven
Interfaces verified to modules
Workshop battery gear included
Line-side lifting alongside
How it works

Booking your LOLER inspection in Ellesmere Port

Tell us what lifts the packs, on the line or in the workshop. We prove the interfaces and issue every report with the next date set.

  • 1

    Get in touch

    Tell us what lifting equipment you have in Ellesmere Port.

  • 2

    On-site examination

    A competent engineer surveyor thoroughly examines each item.

  • 3

    Your report

    You receive a Report of Thorough Examination, your legal record.

Why businesses choose SEIS

  • Independent and impartial: we examine, we do not sell the equipment
  • Competent engineer surveyors
  • Clear reports issued without delay
  • Single items or whole sites
Areas we cover

LOLER inspection, testing and certification across Ellesmere Port and nearby

Our engineer surveyors cover Ellesmere Port and the towns around it across Cheshire. If your site is nearby, we can almost certainly reach you, so just ask.

Ellesmere PortWhitbyGreat SuttonLittle SuttonHootonStanlow
Other inspections in Ellesmere Port

Related compliance for Ellesmere Port businesses

Many sites need more than one statutory regime. If you use lifting gear, pressure systems, work equipment or extraction in Ellesmere Port, we can examine all of it.

PUWER work equipment in Ellesmere PortView this service PSSR pressure systems in Ellesmere PortView this service COSHH LEV testing in Ellesmere PortView this service
LOLER FAQs

LOLER inspection, testing and certification: common questions

Do you carry out LOLER examinations and certification in Ellesmere Port?
Yes. Our engineer surveyors cover Ellesmere Port and the sites around it, examining battery gear for modern stakes. Call us to arrange a visit.
How quickly can you get to Ellesmere Port?
We keep availability across Cheshire, so a Ellesmere Port visit is usually within a couple of working days, sooner when equipment is needed back in service. Call 0330 043 8191 to book around your operations.
How often must lifting equipment be thoroughly examined?
At least every 6 months for equipment that lifts people and for all lifting accessories, and at least every 12 months for other lifting equipment, or to an examination scheme set by a competent person. Those intervals are legal maximums, and an examination is also due after any exceptional event such as an overload or major repair; the HSE sets this out in its LOLER guidance.
Is LOLER a legal requirement?
Yes. Under LOLER 1998 the duty holder must ensure lifting equipment is thoroughly examined by a competent person and is not used once its examination has lapsed, and that responsibility stays with you even when the work is outsourced.
Do you load-test our lifting equipment every time?
No. LOLER calls for thorough examination, with testing only where it is necessary, and the HSE advises against routine overload testing because it can damage sound equipment. We test only where the examination genuinely requires it.
Who counts as a competent person for LOLER?
Someone with the practical and theoretical knowledge and experience to find defects and judge their significance, and who is sufficiently independent and impartial to report without pressure. The HSE is clear this should not be the person who maintains the same equipment.
What is a LOLER certificate, and how long do I keep it?
It is the Report of Thorough Examination required by Regulation 10, recording each item's condition, any defect found and its category, and the date the next examination is due. Keep it at least until the next examination, and it is this report an inspector or insurer asks to see.
Does lifting equipment also fall under PUWER?
Yes. LOLER covers the lifting duties while PUWER covers the same item as work equipment more generally, so the two overlap. We sort each item to the right regime so nothing is missed or examined twice over.

Due a LOLER inspection or certificate in Ellesmere Port?

Talk to an engineer surveyor, get a quote and book your inspection in Ellesmere Port.

0330 043 8191 Request a quote