PUWER 1998 · Greater Manchester

PUWER inspection and assessment in Bolton

Inspection and testing of work equipment against the five PUWER duties by an independent competent person

An industrial oven is a machine that wants people inside it: racks wheeled in, trays loaded, doors that must never close on anyone and atmospheres that must never meet a spark wrongly. Bolton bakes at serious scale, and PUWER 1998 reads ovens and provers as the machinery they are.

0330 043 8191 Request a quote
  • Independent & impartial
  • Competent engineer surveyors
  • Reports issued promptly

Work equipment we inspect

Bolton, Greater Manchester

  • Machines & production lines
  • Conveyors & material handling
  • Fork trucks & lift fleets
  • Presses, guarding & interlocks
  • Test rigs & one-off equipment
  • Mixers, pumps & process plant
Work equipment we inspect

PUWER inspection and testing for Bolton businesses

Work equipment across the town runs from industrial ovens, provers and cooling systems in the baking and food trades through production and packing machinery to the fork trucks and workshop plant of the estates.

Oven safety lives at the interfaces: doors and interlocks judged for anyone working within the swing and the heat, loading systems whose rack traffic meets people at exactly the busiest moments, hot surfaces and steam release controlled at the points hands actually pass, and travelling ovens examined for the drawing-in hazards their conveyors present. Our inspections test each interface as used, protection proven rather than presumed, and findings recorded per machine in the written record of inspection.

Oven doors and interlocks
Rack traffic interfaces judged
Hot surfaces and steam release
Packing machinery alongside
How it works

Booking your PUWER inspection in Bolton

Walk us through a bake, loading to cooling. We test every interface people meet and issue written inspection records with actions per machine.

  • 1

    Get in touch

    Tell us about the work equipment on your Bolton site.

  • 2

    Risk based inspection

    We assess each machine against the five duties and its risk.

  • 3

    Your report

    You receive a written inspection record with any actions.

Why businesses choose SEIS

  • Independent and impartial: we examine, we do not sell the equipment
  • Competent engineer surveyors
  • Clear reports issued without delay
  • Single items or whole sites
Areas we cover

PUWER inspection and assessment across Bolton and nearby

Our engineer surveyors cover Bolton and the towns around it across Greater Manchester. If your site is nearby, we can almost certainly reach you, so just ask.

BoltonFarnworthHorwichWesthoughtonLittle LeverAstley Bridge
Other inspections in Bolton

Related compliance for Bolton businesses

Many sites need more than one statutory regime. If you use lifting gear, pressure systems, work equipment or extraction in Bolton, we can examine all of it.

LOLER lifting equipment in BoltonView this service PSSR pressure systems in BoltonView this service COSHH LEV testing in BoltonView this service
PUWER FAQs

PUWER inspection and testing: common questions

Do you carry out PUWER inspections in Bolton?
Yes. Our engineer surveyors cover Bolton and the surrounding sites, and inspect every kind of work equipment, ovens tested at their interfaces. Call us to arrange a visit.
How quickly can you get to Bolton?
We keep availability across Greater Manchester, so a Bolton visit is usually within a couple of working days, sooner after a repair or modification. Call 0330 043 8191 to book around your production.
How often must work equipment be inspected under PUWER?
There is no single fixed interval. PUWER sets the frequency by the equipment, its risks and where it works, so hard-used or outdoor machinery is inspected more often, guided by the maker's advice and your risk assessment. The HSE explains this risk-based approach in its PUWER guidance.
Is PUWER a legal requirement?
Yes. Under PUWER 1998 whoever provides or controls work equipment must keep it suitable, maintained and inspected by a competent person, and that duty stays with the end user, including equipment that is hired in.
Does a PUWER inspection produce a certificate?
No. PUWER calls for a written record of inspection, not a certificate, naming each item, its condition, any defect and the date the next inspection is due. We keep that record clear and defensible, and it is what an HSE inspector asks to see.
Who can carry out a PUWER inspection?
A competent person with the knowledge and experience to know what to look at, what to look for and what to do about any defect. Simple low-risk items can be checked in-house by trained staff, while higher-risk machinery is better inspected by an independent competent person.
What does a PUWER inspection cover?
Whether the equipment is suitable and correctly installed, the condition of guards, interlocks, controls and stop devices, and any deterioration that has set in. Defects and the action needed are written down so nothing is lost between inspections.
How is PUWER different from LOLER?
LOLER covers lifting equipment and ends in a Report of Thorough Examination, while PUWER covers all work equipment and ends in an inspection record. They overlap on lifting machinery, so we sort each item to the right regime and inspect it once, correctly.

Need a PUWER inspection in Bolton?

Talk to an engineer surveyor, get a quote and book your inspection in Bolton.

0330 043 8191 Request a quote